Low Pressure Self-Cleaning Water Filters (LPF Series)
Automatic low pressure self-cleaning water filters (15 PSI and Above)
LPF Series
Low pressure self-cleaning water filters designed to operate at pressures as low as 15 PSI. The LPF Series provides reliable automatic filtration for industrial, irrigation, and municipal systems where traditional high-pressure filters are not suitable. Designed for low pressure self-cleaning water filtration systems where consistent performance is required without high operating pressure.
Low pressure self-cleaning water filters are automatic filtration systems designed to operate in environments where available pressure is limited. Unlike conventional filters that require higher operating pressure, LPF systems maintain efficient filtration and cleaning cycles at pressures as low as 15 PSI. This makes them ideal for gravity-fed systems, open water sources, and applications where boosting pressure is not practical or cost-effective. These systems are commonly used in irrigation, canal water filtration, and gravity-fed industrial applications where maintaining higher pressure is not feasible. The LPF Series operates as an automatic low pressure self-cleaning water filtration system that removes debris from the screen without interrupting flow.
- Continuous filtration during cleaning cycles
- Minimal pressure loss (less than 1 PSI at rated flow)
- Reduced water waste during flushing
- No manual cleaning required
How Low Pressure Self-Cleaning Filters Work
LPF Series filters operate as automatic low pressure filter systems using a pressure differential-driven cleaning cycle. As debris accumulates on the screen, the system initiates an automatic flush sequence that removes contaminants without interrupting flow.
Key benefits include:
- Continuous filtration during cleaning cycles
- No manual intervention required
- Reduced water waste during flushing
- Consistent pressure and flow performance
View system integration options:
automatic filtration systems for industrial use
Irrigation Systems
Canal and Surface Water
Lake and Raw Water Filtration
Industrial Applications
Car Wash Water Reuse
The LPF Series is designed specifically for low-pressure filtration environments where traditional automatic filters cannot operate effectively.
Choosing the correct system ensures optimal performance and long-term reliability.
The LPF Series includes a wide range of models designed to handle different flow rates, pipe sizes, and filtration requirements. These low pressure filtration system models are designed to support a wide range of flow rates while maintaining efficient operation at reduced pressure levels. These automatic low pressure filter models are designed to support a wide range of industrial flow requirements, from small systems to large-scale filtration installations. Use the table below to compare flange sizes, screen areas, and maximum flow capacities for each model.
| Filter Model | Flange Size (in) | Screen Area (sq ft) | Max Flow (gpm) | Empty Weight (lbs) | Cut Sheet | Installation Layout |
|---|---|---|---|---|---|---|
| LPF2-LP | 2 | 0.5 | 130 | 120 | ||
| LPF2-SP | 2 | 1.4 | 200 | 150 | ||
| LPF2-XLP | 2 | 2.5 | 250 | 180 | PDF | STEP | |
| LPF3-LP | 3 | 2.5 | 300 | 250 | PDF | STEP | |
| LPF3-SP | 3 | 1.4 | 200 | 150 | ||
| LPF3-XLP | 3 | 5 | 400 | 280 | PDF | STEP | |
| LPF4-LP | 4 | 5 | 600 | 280 | PDF | STEP | |
| LPF4-LPE | 4 | 2.5 | 400 | 250 | PDF | STEP | |
| LPF4-P | 4 | 1.4 | 300 | 200 | PDF | | |
| LPF4-XLP | 4 | 8 | 800 | 325 | PDF | STEP | |
| LPF6-LP | 6 | 5 | 800 | 300 | PDF | STEP | |
| LPF6-P | 6 | 2.5 | 600 | 260 | PDF | STEP | |
| LPF6-SP | 6 | 7 | 1750 | 535 | PDF | STEP | |
| LPF6-XLP | 6 | 8 | 800 | 335 | PDF | STEP | |
| LPF8-LP | 8 | 8 | 1500 | 360 | PDF | STEP | |
| LPF8-P | 8 | 5 | 1320 | 340 | PDF | STEP | |
| LPF8-SLP | 8 | 11 | 2500 | 620 | PDF | STEP | |
| LPF8-SP | 8 | 7 | 1750 | 560 | PDF | STEP | |
| LPF8-TLP | 8 | 16 | 2500 | 1000 | ||
| LPF10-LP | 10 | 11 | 2630 | 650 | PDF | STEP | |
| LPF10-P | 10 | 7 | 1750 | 585 | PDF | STEP | |
| LPF10-SLP | 10 | 12.5 | 4000 | 825 | PDF | STEP | |
| LPF10-XLP | 10 | 16 | 6000 | 1300 | PDF | STEP | |
| LPF12-LP | 12 | 12.5 | 4000 | 850 | PDF | STEP | |
| LPF12-P | 12 | 11 | 2630 | 690 | PDF | STEP | |
| LPF12-TP | 12 | 22 | 3000 | 1500 | ||
| LPF12-XLP | 12 | 16 | 6000 | 1300 | PDF | STEP | |
| LPF14-LP | 14 | 16 | 6000 | 1350 | PDF | STEP | |
| LPF14-P | 14 | 12.5 | 4000 | 900 | PDF | STEP | |
| LPF14-TLP | 14 | 32 | 12000 | 3000 | ||
| LPF16-LP | 16 | 16 | 6000 | 1400 | PDF | STEP | |
| LPF16-P | 16 | 12.5 | 5000 | 925 | PDF | STEP | |
| LPF16-SP | 16 | 24 | 10000 | 2500 | PDFSTEP | |
| LPF16-TLP | 16 | 32 | 12000 | 3000 | ||
| LPF16-TRLP | 16 | 48 | 18000 | 4500 | ||
| LPF18-LP | 18 | 16 | 6000 | 1450 | PDF | STEP | |
| LPF18-SP | 18 | 24 | 10000 | 1500 | PDF | STEP | |
| LPF20-SP | 20 | 24 | 10000 | 2500 | PDF | STEP | |
| LPF24-SP | 24 | 24 | 10000 | 2500 | PDF | STEP | |
| LPF24-TLP | 24 | 32 | 12000 | 3000 |
Tekleen LPF Series low pressure self-cleaning water filters are engineered for environments where low pressure and high reliability are critical.
Proven Performance in Low Pressure Applications
Minimal Maintenance and Continuous Operation
Scalable for High-Flow Systems
Designed for Challenging Water Sources
Real-World Performance
Access manuals, installation layouts, and engineering documentation for LPF Series filters.
Available resources include:
- LPF Series manuals
- Installation layouts and wiring diagrams
- Engineering drawings and configurations
Get expert assistance selecting the right low pressure self-cleaning water filter for your system.